How to Set Up Barcode Scanning in the Legacy Builder

Have more questions? Submit a request

Scan barcodes with your GoCanvas compatible mobile device or wedge barcode scanner.

Barcode Fields

Make sure your device's camera has Autofocus functionality. Otherwise it will not read a barcode. Adding a Barcode field is as easy as dragging and dropping the field into your form.

LB_Barcode Field.gif

Barcode Scanning on Mobile

If using an iOS or Android device, launch the GoCanvas application. In your form, you will now see the button Capture Barcode below the text box.

  1. Tap the Capture Barcode button.iOS_Barcode Field.png
  2. Your device's camera will launch and you will see a square in the center of the screen.
  3. You will now need to line up the barcode within the square.
  4. The square will turn green once the form can read the barcode and the code will be captured like taking a picture. You don’t have to do anything more than lining up the barcode with in the box and wait for it to capture.          iOS_Barcode Field_Captured.png

Once the barcode has been captured you will see the screen go back to your form and the barcode field will be populated with the code.

Note

Press and hold on the barcode field if you want to manually type the code. If you want to prevent users from manually entering a barcode, use the Read Only field setting.

Visit the Help Center article, "How to Pair Reference Data to a Barcode in the Legacy Builder," to learn more about using reference data with barcodes.

Articles in this section

Was this article helpful?
0 out of 4 found this helpful
Share

Comments

0 comments

Please sign in to leave a comment.